Boke TPU Quantum-PLUS Clear Paint Protection Film 1.52*15m
Support customization
Own factory
Advanced technology
Signature Features of TPU Matte Black
Oustanding Matte Black
Our premium offering Boke ultimate-black matte protects your paint in virtually any climate zone and weather conditions while adding pristine matte look to your vehicle. Boke TPU Matte Black can offer perfect combination of longevity, durability and toughness with industry leading 5 years limited warranty.
Durable Performance
Based on years of experience in manufacturing protective films Boke Paint Protection Film is built to protect against rocks, insects, sand, salt, and other hazards that may damage the paint on your new car. Boke TPU Matte Black performs to the highest standards set by the market.
Auto-healing
Heat-activated self-healing topcoats have already been rendered obsolete, and the Boke ultimate-black matte PPF self-heals tiny scratches and swirl marks at room temperature. Boke is considerably superior to masking tape or unpleasant spray-on alternatives.
Hydrophobic Features
When it rains, the debris mixed with the water causes unsightly scars on the vehicle. Not only does Boke PPF provide a strong barrier against pebbles and road debris, but its hydrophobic property causes rain to produce big droplets with no visible watermark.
The Best Film in Good Hands
Dealers and customers can clearly spot the colored ppf film base, and they can tell that the Boke PPF has higher clarity and brightness than most other brands. The self-healing Boke ppf film will maintain it in excellent condition. Or, give your matte paint a new appearance to protect it!
Structure Inside
1. PET Protective Layer
The functional top coating protects the coatings beneath and keeps them from being damaged during manufacturing and shipment.
2. Corrosion Resistant Nano Top Coating
A strong corrosion resistance nano coating is manufactured in Japan, considerably enhancing corrosion resistance to acid, alkali, and salt. When harmed on a modest scale, heat activates self-healing.
3. High Gloss Treatment
Increase the gloss of the paint protection film, and keep it glossy.
4. Aliphatic Polyurethane TPU Substrate
This layer possesses high tensile strength, as well as tear resistance, anti-yellowing resistance, aging resistance, and puncture resistance.
5. Ashland Adhesives Layer
Using high-end adhesive from Ashland , there will be no mark guard and no damage to the paint surface.
6. Release Film
It is frequently utilized as the initial barrier between the composite laminate and the rest of the vacuum bagging components, and it is designed to easily manage the laminate's resin content.
| Model | TPU-Ultimate-Black Gloss |
| Material | TPU |
| Thickness | 7.5mil±3% |
| Specifications | 1.52*15m |
| Gross Weight | 11kg |
| Net Weight | 9.5kg |
| Package Size | 159*18.5*17.5cm |
| Coating | Nano hydrophobic coating |
| Structure | 3 layers |
| Glue | Henkel, Germany |
| Adhesive Thickness | 20um-25um |
| Film Mounting Type | PET |
| Repair | Automatic thermal repair |
| Puncture Resistance | GB/T1004-2008/＞18N |
| UV Barrier | ＞ 98.5% |
| Tensile Strength | ＞ 25mpa |
| Hydrophobic self-cleaning | ＞ +25% |
| Anti-fouling and Corrosion Resistance | ＞ +15% |
| Glare | ＞ +5% |
| Aging Resistance | ＞ +20% |
| Hydrophobic Angle | ＞ 101°-107° |
| Elongation at Break | ＞ 300% |
| Features | Test Method |
| Release Force N/25mm | paste on steel board, 90° 26℃ and 60%, GB2792 |
| Initial Tack N/25mm | under 24℃ and 26%, GB31125-2014 |
| Peel Strength N/25mm | paste on steel board, 180° 15 Minutes under 29℃and 55%, GB/T2792-1998 |
| Holding Power(h) | paste on steel board,hang on by 25mm*25mm*1kg weight under 29℃ and 55%, GB/T4851-1998 |
| Gloss(60°) | GB 8807 |
| Application Temperature | / |
| Service Temperature | / |
| Humidity Resistance | 120 hours exposure |
| Salt-spray Resistance | 120 hours exposure |
| Water Resistance | 120 hours exposure |
| Chemical Resistance | 1hour diesel oil immersion,4hours antifreeze immersion |
| Gloss | >90(%) |
| Aging Test 1 | 7 days under 70°C |
| Aging Test 2 | 10 days under 90°C |
| Tensile Strength | ＞ 25mpa |
| Hydrophobic Self-cleaning | ＞ +25% |
| Anti-fouling and Corrosion Resistance | ＞ +15% |
| Glare | ＞ +5% |
| Aging Resistance | ＞ +20% |
| Hydrophobic Angle | ＞ 101°-107° |
| Elongation at Break | ＞ 300% |
| Self-healing Rate | 35℃ Water 5S 98% |
| Tear Strength | 4700psi |
| Maximum Temperature | 120℃ |
Join Us
Being a distributor is the most important kind of cooperation in our commercial relationships. We exclusively work on an exclusive basis, and once you begin introducing the brand to your market, Boke will not be shipped to your competitors.
BOKE's super factory can provide various customization services based on customers' needs. With high-end equipment in the United States, collaboration with German expertise, and strong backing from German raw material suppliers. BOKE's film super factory can meet all of its customers' needs.
Bock can create new film features, colors, and textures to fulfill the specific needs of agents who want to personalize their unique films. Don't hesitate to get in touch with us right away for additional information on customization and pricing.
contact us
Highly Customization service
BOKE can offer various customization services based on customers' needs. With high-end equipment in the United States, collaboration with German expertise, and strong backing from German raw material suppliers. BOKE's film super factory ALWAYS can meet all of its customers' needs.
Boke can create new film features, colors, and textures to fulfill the specific needs of agents who want to personalize their unique films. Don't hesitate to get in touch with us right away for additional information on customization and pricing.
-
Tanzanite Blue – TPU Color Changing Filmlearn more -
TPU HD Sunroof Surface Protector Filmlearn more -
Venice Purple – TPU Color Changing Filmlearn more -
Matte Black-TPU Color Changing Filmlearn more -
Sakura Powder-TPU Color Changing Filmlearn more -
Automotive Window Film – S Serieslearn more